Can the BLUETTI Apex 300 run a space heater?

The three checks

Space heater on its own, with nothing else plugged in, against the published ratings of the BLUETTI Apex 300.

Space heater on the BLUETTI Apex 300: power checks
Check	Needs	Station has	Result
Running watts against continuous output	1,500 W	3,840 W	Passes
Starting watts against surge rating	1,500 W, no start surge	3,840 W, surge rating not published	Passes
A full day at 8 h a day	12,000 Wh	2,350 Wh usable	Fails

How long it runs across models

The appliance class spans a range of models. Running time on a full charge at the low, typical and high figure in the data:

Space heater on the BLUETTI Apex 300, low to high
Case	Running watts	Running time
Low end of the class	750 W	3.1 h
Typical	1,500 W	1.6 h
High end of the class	1,500 W	1.6 h

Watts vary by model and age. Check the label on your own appliance and enter it for an exact answer.

Keeping up on solar

At 4 peak sun hours, counting 75% of the panel rating: 200 W of panels bring in about 600 Wh a day, 5% of the 12,000 Wh it uses at 8 h a day. 2,400 W of panels bring in about 7,200 Wh a day, 60% of the 12,000 Wh it uses at 8 h a day.

Other options

No BLUETTI model in the data is enough for a full day of a space heater. The nearest capacities from any brand:

The stations closest in capacity to the BLUETTI Apex 300, with a space heater
Power station	Capacity	Verdict	Running time
Anker SOLIX F2600	2,560 Wh	Runs it, but not long enough	1.5 h
BLUETTI Elite 300	3,014 Wh	Runs it, but not long enough	1.7 h
Anker SOLIX F3000	3,072 Wh	Runs it, but not long enough	1.7 h

The BLUETTI Apex 300

Everything the BLUETTI Apex 300 runs, its recharge times and full specifications

BLUETTI's page for the Apex 300 (opens in a new tab)

Enough Watts may earn a commission when you buy through links on this page. It never changes the math or the ranking.