Can the BLUETTI Apex 300 run a sump pump?

The three checks

1/2 HP sump pump on its own, with nothing else plugged in, against the published ratings of the BLUETTI Apex 300.

1/2 HP sump pump on the BLUETTI Apex 300: power checks
Check	Needs	Station has	Result
Running watts against continuous output	925 W	3,840 W	Passes
Starting watts against surge rating	1,725 W	3,840 W, surge rating not published	Passes
A full day at 2 h a day	1,850 Wh	2,350 Wh usable	Passes

How long it runs across models

The appliance class spans a range of models. Running time on a full charge at the low, typical and high figure in the data:

1/2 HP sump pump on the BLUETTI Apex 300, low to high
Case	Running watts	Running time
Low end of the class	800 W	2.9 h
Typical	925 W	2.5 h
High end of the class	1,050 W	2.2 h

Watts vary by model and age. Check the label on your own appliance and enter it for an exact answer.

Keeping up on solar

At 4 peak sun hours, counting 75% of the panel rating: 200 W of panels bring in about 600 Wh a day, 32% of the 1,850 Wh it uses at 2 h a day. 2,400 W of panels bring in about 7,200 Wh a day, more than the 1,850 Wh it uses at 2 h a day, so the station keeps up.

Other options

The BLUETTI Apex 300 is the smallest BLUETTI model in the data that is enough for a full day of a 1/2 HP sump pump. The nearest capacities from any brand:

The stations closest in capacity to the BLUETTI Apex 300, with a 1/2 HP sump pump
Power station	Capacity	Verdict	Running time
Anker SOLIX F2600	2,560 Wh	Enough	2.4 h
BLUETTI Elite 300	3,014 Wh	Enough	2.8 h
Anker SOLIX F3000	3,072 Wh	Enough	2.8 h

The BLUETTI Apex 300

Everything the BLUETTI Apex 300 runs, its recharge times and full specifications

BLUETTI's page for the Apex 300 (opens in a new tab)

Enough Watts may earn a commission when you buy through links on this page. It never changes the math or the ranking.