What size power station for a countertop blender?
It needs a station with at least 600 W of continuous output and a surge rating of at least 700 W to start it. At the default 85% efficiency it takes about 35 Wh of rated capacity for its typical 3 min a day, and 706 Wh for 1 hour of use. 47 of the 54 power stations in the Enough Watts data set can power it. The smallest one that keeps it going for 1 hour of use is the BLUETTI Elite 100 mini (1,005 Wh).
Updated
The short answer
600W
Continuous output
700W
Surge to start it
35Wh
Capacity for its typical 3 min a day
706Wh
Capacity for 1 hour of use
47 of 54
Stations that power it
How many watts does a countertop blender use?
Typical figures for this type, from the sources at the foot of this page. Watts vary by model and age. Check the label on your own appliance and enter it for an exact answer.
- Running, typical
- 600 W
- Running, low to high
- 300 W to 1,200 W
- Starting
- 700 W600 W to 1,500 W, 1.2 times running
- Typical use a day
- 3 minhours the motor actually runs
- Average draw while on
- 600 W
- Voltage
- 120 V
- Assumes the motor runs the whole time; real use is often less.
Explained in: Watts vs watt hours, explained, How to read an appliance label for watts and Starting watts explained.
The math
Worked with the typical figure, as the calculator does it.
- Output600 W running, so the station's continuous output must be at least 600 W.
- Surge700 W to start, so its surge rating must be at least 700 W.
- Average draw600 W: the running watts count for every hour it is on, as if the motor never paused.
- A typical day600 W × 3 min = 30 Wh a day.
- Typical 3 min a day600 W × 3 min = 30 Wh usable, ÷ 0.85 = 35 Wh of rated capacity.
- 1 hour of use600 W × 1 h = 600 Wh usable, ÷ 0.85 = 706 Wh of rated capacity.
- On the BLUETTI Elite 100 mini1,005 Wh × 0.85 = 854 Wh usable, ÷ 600 W = 1.4 h of use.
Stations that run it
Every power station in the data with this appliance alone plugged in, at 85% efficiency. Type the running watts from your own label and the table works it out again.
Typical 600 W, from 300 W to 1,200 W. Watts vary by model and age. Check the label on your own appliance and enter it for an exact answer.
47 of 54 power stations run it at 600 W and 700 W to start.
| Power station | Can it power it | Running time | Output | Start surge |
|---|---|---|---|---|
| EcoFlow RIVER 3 Plus | Runs it | 24 min of use | 600 W | 1,200 W |
| DJI Power 500 | Runs it | 44 min of use | 1,000 W | not published |
| Goal Zero Yeti 700 | Runs it | 58 min of use | 600 W | 1,000 W |
| BLUETTI Elite 100 mini | Runs it | 1.4 h of use | 700 W | 1,050 W |
| BLUETTI Elite 100 V2 | Runs it | 1.5 h of use | 1,800 W | 3,600 W |
| EcoFlow DELTA 3 Classic | Runs it | 1.5 h of use | 1,800 W | 3,600 W |
| Anker SOLIX C1000 Gen 2 | Runs it | 1.5 h of use | 2,000 W | 3,000 W |
| EcoFlow DELTA 3 | Runs it | 1.5 h of use | 1,800 W | 3,600 W |
| EcoFlow DELTA 3 Plus | Runs it | 1.5 h of use | 1,800 W | 3,600 W |
| Pecron E1000LFP | Runs it | 1.5 h of use | 1,800 W | 3,000 W |
| DJI Power 1000 | Runs it | 1.5 h of use | 2,200 W | 4,400 W |
| Anker SOLIX C1000 | Runs it | 1.5 h of use | 1,800 W | 2,400 W |
| Jackery Explorer 1000 v2 | Runs it | 1.5 h of use | 1,500 W | 3,000 W |
| BLUETTI AC180 | Runs it | 1.6 h of use | 1,800 W | 2,700 W |
| ALLPOWERS R1500 | Runs it | 1.6 h of use | 1,800 W | 3,000 W |
| Jackery Explorer 1000 Plus | Runs it | 1.8 h of use | 2,000 W | 4,000 W |
| Goal Zero Yeti 1500 | Runs it | 2.1 h of use | 2,000 W | 3,600 W |
| Jackery Explorer 1500 v2 | Runs it | 2.2 h of use | 2,000 W | 4,000 W |
| Jackery Explorer 1500 Ultra | Runs it | 2.2 h of use | 1,800 W | 3,600 W |
| ALLPOWERS R2500 V2 | Runs it | 2.7 h of use | 2,500 W | 4,000 W |
| Jackery Explorer 2000 v2 | Runs it | 2.9 h of use | 2,200 W | 4,400 W |
| Jackery HomePower 2000 Plus v2 | Runs it | 2.9 h of use | 2,400 W | 4,800 W |
| EcoFlow DELTA 3 Max | Runs it | 2.9 h of use | 2,400 W | 4,800 W |
| Pecron E2400LFP | Runs it | 2.9 h of use | 2,400 W | 4,000 W |
| Anker SOLIX C2000 Gen 2 | Runs it | 2.9 h of use | 2,400 W | 4,000 W |
| EcoFlow DELTA 3 Max Plus | Runs it | 2.9 h of use | 3,000 W | 6,000 W |
| OUPES Mega 2 Pro | Runs it | 2.9 h of use | 2,500 W | not published |
| DJI Power 2000 | Runs it | 2.9 h of use | 3,000 W | not published |
| BLUETTI Elite 200 V2 | Runs it | 2.9 h of use | 2,600 W | not published |
| Anker SOLIX F2600 | Runs it | 3.6 h of use | 2,400 W | 2,800 W |
| BLUETTI Apex 300 | Runs it | 3.9 h of use | 3,840 W | not published |
| BLUETTI Elite 300 | Runs it | 4.3 h of use | 2,400 W | 4,800 W |
| EcoFlow DELTA 3 Ultra | Runs it | 4.4 h of use | 3,600 W | 7,200 W |
| Anker SOLIX F3000 | Runs it | 4.4 h of use | 3,600 W | 7,200 W |
| EcoFlow DELTA 3 Ultra Plus | Runs it | 4.4 h of use | 3,600 W | 7,200 W |
| Pecron E3600LFP | Runs it | 4.4 h of use | 3,600 W | 7,000 W |
| ALLPOWERS R3500 | Runs it | 4.5 h of use | 3,200 W | 6,000 W |
| ALLPOWERS R4000 | Runs it | 4.9 h of use | 3,600 W | 6,000 W |
| BLUETTI Elite 400 | Runs it | 5.4 h of use | 2,600 W | 5,200 W |
| Anker SOLIX F3800 | Runs it | 5.4 h of use | 6,000 W | 9,000 W |
| Anker SOLIX F3800 Plus | Runs it | 5.4 h of use | 6,000 W | 9,000 W |
| Goal Zero Yeti PRO 4000 | Runs it | 5.7 h of use | 3,600 W | 7,200 W |
| EcoFlow DELTA Pro 3 | Runs it | 5.8 h of use | 4,000 W | 8,000 W |
| OUPES Guardian 6000 V2 | Runs it | 6.5 h of use | 6,000 W | 9,000 W |
| Jackery Explorer 5000 Plus | Runs it | 7.1 h of use | 7,200 W | 14,400 W |
| EcoFlow DELTA Pro Ultra | Runs it | 8.7 h of use | 7,200 W | 10,800 W |
| EcoFlow DELTA Pro Ultra X | Runs it | 17.4 h of use | 12,000 W | not published |
| BLUETTI Elite 10 Mini | Cannot power itNeeds 600 W running at once; this station gives 200 W. Needs 700 W to start; this station peaks at 300 W. | none | 200 W | 300 W |
| Jackery Explorer 240 v2 | Cannot power itNeeds 600 W running at once; this station gives 300 W. Needs 700 W to start; this station peaks at 600 W. | none | 300 W | 600 W |
| BLUETTI Elite 30 V2 | Cannot power itNeeds 700 W to start. Its surge rating is not published, and its 600 W continuous rating is lower. | none | 600 W | not published |
| Jackery Explorer 300 v2 | Cannot power itNeeds 600 W running at once; this station gives 300 W. Needs 700 W to start; this station peaks at 600 W. | none | 300 W | 600 W |
| Goal Zero Yeti 300 | Cannot power itNeeds 600 W running at once; this station gives 350 W. Needs 700 W to start; this station peaks at 600 W. | none | 350 W | 600 W |
| Goal Zero Yeti 500 | Cannot power itNeeds 600 W running at once; this station gives 500 W. | none | 500 W | 1,000 W |
| Jackery Explorer 600 v2 | Cannot power itNeeds 600 W running at once; this station gives 500 W. | none | 500 W | 1,000 W |
What moves the number
A blender pulls its peak in the first seconds, when the blades meet ice or frozen fruit. Running figures span 300 W to 1,200 W, and the start reaches about 700 W, up to 1,500 W for the most powerful models.
It runs for seconds at a time, so it barely touches the battery. The surge rating is the number to check.
Questions
How many watts does a countertop blender use?
Can a portable power station run a countertop blender?
How long will a power station run a countertop blender?
Why does a countertop blender need a high surge rating?
Sources
Researched from these pages, then checked against them a second time. The check corrected at least one figure.
- Hamilton Beach Use and Care Guide, models 58870 maker manual, checked
- Ninja Professional Plus Blender with Auto-iQ BN701 product page maker product page, checked
- Generator Wattage Chart: Common Appliances & Tools (Champion Power Equipment) generator maker guide, checked
- Choosing a Generator, Quick Reference Wattage flyer (Champion Power Equipment) generator maker guide, checked
- Generator Wattage Worksheet (Generac, K182637) generator maker guide, checked
- Hamilton Beach Professional 1500 Watt Peak Power Quiet Blender - 58870 maker product page, checked
We read published figures and do the math; we do not measure appliances. The methodology states every formula on this page. Capacities are rated watt hours: 1,000 Wh rated gives 850 Wh usable at the default.