The three checks

Furnace blower on its own, with nothing else plugged in, against the published ratings of the Anker SOLIX C1000.

Furnace blower on the Anker SOLIX C1000: power checks
CheckNeedsStation hasResult
Running watts against continuous output550 W1,800 WPasses
Starting watts against surge rating1,200 W2,400 WPasses
A full day at 12 h a day6,600 Wh898 Wh usableFails

How long it runs across models

The appliance class spans a range of models. Running time on a full charge at the low, typical and high figure in the data:

Furnace blower on the Anker SOLIX C1000, low to high
CaseRunning wattsRunning time
Low end of the class300 W3.0 h
Typical550 W1.6 h
High end of the class875 W1.0 h

Watts vary by model and age. Check the label on your own appliance and enter it for an exact answer.

Keeping up on solar

At 4 peak sun hours, counting 75% of the panel rating: 200 W of panels bring in about 600 Wh a day, 9% of the 6,600 Wh it uses at 12 h a day. 600 W of panels bring in about 1,800 Wh a day, 27% of the 6,600 Wh it uses at 12 h a day.

Other options

No Anker SOLIX model in the data is enough for a full day of a gas furnace blower. The nearest capacities from any brand:

The stations closest in capacity to the Anker SOLIX C1000, with a gas furnace blower
Power stationCapacityVerdictRunning time
BLUETTI Elite 100 V21,024 WhRuns it, but not long enough1.6 h
Anker SOLIX C1000 Gen 21,024 WhRuns it, but not long enough1.6 h
Jackery Explorer 1000 v21,070 WhRuns it, but not long enough1.7 h

The Anker SOLIX C1000

Everything the Anker SOLIX C1000 runs, its recharge times and full specifications

Anker SOLIX's page for the C1000 (opens in a new tab)

Enough Watts may earn a commission when you buy through links on this page. It never changes the math or the ranking.