The three checks

Furnace blower on its own, with nothing else plugged in, against the published ratings of the Jackery Explorer 1000 v2.

Furnace blower on the Jackery Explorer 1000 v2: power checks
CheckNeedsStation hasResult
Running watts against continuous output550 W1,500 WPasses
Starting watts against surge rating1,200 W3,000 WPasses
A full day at 12 h a day6,600 Wh910 Wh usableFails

How long it runs across models

The appliance class spans a range of models. Running time on a full charge at the low, typical and high figure in the data:

Furnace blower on the Jackery Explorer 1000 v2, low to high
CaseRunning wattsRunning time
Low end of the class300 W3.0 h
Typical550 W1.7 h
High end of the class875 W1.0 h

Watts vary by model and age. Check the label on your own appliance and enter it for an exact answer.

Keeping up on solar

At 4 peak sun hours, counting 75% of the panel rating: 200 W of panels bring in about 600 Wh a day, 9% of the 6,600 Wh it uses at 12 h a day. 400 W of panels bring in about 1,200 Wh a day, 18% of the 6,600 Wh it uses at 12 h a day.

Other options

No Jackery model in the data is enough for a full day of a gas furnace blower. The nearest capacities from any brand:

The stations closest in capacity to the Jackery Explorer 1000 v2, with a gas furnace blower
Power stationCapacityVerdictRunning time
BLUETTI Elite 100 V21,024 WhRuns it, but not long enough1.6 h
Anker SOLIX C1000 Gen 21,024 WhRuns it, but not long enough1.6 h
Anker SOLIX C10001,056 WhRuns it, but not long enough1.6 h

The Jackery Explorer 1000 v2

Everything the Jackery Explorer 1000 v2 runs, its recharge times and full specifications

Jackery's page for the Explorer 1000 v2 (opens in a new tab)

Enough Watts may earn a commission when you buy through links on this page. It never changes the math or the ranking.