Watts

Typical figures for this type, from the sources at the foot of this page. Watts vary by model and age. Check the label on your own appliance and enter it for an exact answer.

Running, typical
290 W
Running, low to high
200 W to 590 W
Starting
Not publishedmotors often need 2 to 3 times their running watts to start
Typical use a day
24 hhours the motor actually runs
Average draw while on
290 W
Voltage
120 V
  • Counts the running watts for every hour you enter.
  • Starting watts not published; motors often need 2 to 3 times their running watts to start.
For medical equipment, confirm the power needs with the device maker and keep a backup plan. This page is not medical advice. At the high end of the range, 590 W, the EcoFlow DELTA Pro Ultra X runs it for 17.7 h, not 36.0 h.

The math

Worked with the typical figure, as the calculator does it.

  1. Output290 W running, so the station's continuous output must be at least 290 W.
  2. SurgeStarting watts are not published, so the surge check uses the 290 W running figure.
  3. Average draw290 W: the running watts count for every hour it is on, as if the motor never paused.
  4. A typical day290 W × 24 h = 6,960 Wh a day.
  5. 8 hours of running290 W × 8 h = 2,320 Wh usable, ÷ 0.85 = 2,729 Wh of rated capacity.
  6. 24 hours of running290 W × 24 h = 6,960 Wh usable, ÷ 0.85 = 8,188 Wh of rated capacity.
  7. On the EcoFlow DELTA Pro Ultra X12,288 Wh × 0.85 = 10,445 Wh usable, ÷ 290 W = 36.0 h.

Stations that run it

Every power station in the data with this appliance alone plugged in, at 85% efficiency. Type the running watts from your own label and the table works it out again.

Add it to the runtime calculator with the rest of your list

What moves the number

The flow it is built for sets the draw: 200 W for a 2 liter per minute unit, about 290 W for a 5 liter one, and up to 590 W for a 10 liter unit. Its compressor never pauses while the unit is on, and no start figure is published.

Keep the backup oxygen your supplier provides, and confirm the power needs with the device maker.

Questions

How many watts does an oxygen concentrator (home, stationary) use?
About 290 W while running, from 200 W to 590 W across the models in our sources. Watts vary by model and age. Check the label on your own appliance and enter it for an exact answer.
Can a portable power station run an oxygen concentrator (home, stationary)?
Yes. 53 of the 54 power stations in the Enough Watts data set can power it on its own. It takes at least 290 W of continuous output.
How long will a power station run an oxygen concentrator (home, stationary)?
It depends on the battery. At 85% efficiency the smallest station that powers it, the Jackery Explorer 240 v2 (256 Wh), gives about 45 min. The largest, the EcoFlow DELTA Pro Ultra X (12,288 Wh), gives about 36.0 h.
Does an oxygen concentrator (home, stationary) need extra watts to start?
Its starting watts are not published, and motors often need 2 to 3 times their running watts to start. Without a published figure the site checks the start at the 290 W running figure, so leave headroom above that on your station.

Setups that include it

Sources

Researched from these pages, then checked against them a second time. The check corrected at least one figure.

  1. AirSep VisionAire 5, CAIRE Inc. maker product page, checked
  2. 10 LPM Stationary Oxygen Concentrator, NewLife Intensity 10 by CAIRE maker product page, checked
  3. Intenoxy 5, CAIRE Inc. maker product page, checked

We read published figures and do the math; we do not measure appliances. The methodology states every formula on this page. Capacities are rated watt hours: 1,000 Wh rated gives 850 Wh usable at the default.