What size power station for a Starlink Mini dish?
It needs a station with at least 33 W of continuous output. At the default 85% efficiency it takes about 311 Wh of rated capacity for 8 hours of running, and 932 Wh for 24 hours of running. 54 of the 54 power stations in the Enough Watts data set can power it. The smallest one that keeps it going for 24 hours of running is the BLUETTI Elite 100 mini (1,005 Wh).
Updated
The short answer
33W
Continuous output
None
Surge to start it
311Wh
Capacity for 8 hours of running
932Wh
Capacity for 24 hours of running
54 of 54
Stations that power it
How many watts does a Starlink Mini dish use?
Typical figures for this type, from the sources at the foot of this page. Watts vary by model and age. Check the label on your own appliance and enter it for an exact answer.
- Running, typical
- 33 W
- Running, low to high
- 25 W to 40 W
- Starting
- No start surge
- Typical use a day
- 24 hthe calculator starts from this, and you can change it
- Average draw while on
- 33 W
- Voltage
- 120 V
Explained in: Watts vs watt hours, explained and How to read an appliance label for watts.
The math
Worked with the typical figure, as the calculator does it.
- Output33 W running, so the station's continuous output must be at least 33 W.
- SurgeNo start surge: the running figure covers it.
- Average draw33 W: the running watts count for every hour it is on.
- A typical day33 W × 24 h = 792 Wh a day.
- 8 hours of running33 W × 8 h = 264 Wh usable, ÷ 0.85 = 311 Wh of rated capacity.
- 24 hours of running33 W × 24 h = 792 Wh usable, ÷ 0.85 = 932 Wh of rated capacity.
- On the BLUETTI Elite 100 mini1,005 Wh × 0.85 = 854 Wh usable, ÷ 33 W = 25.9 h.
Stations that run it
Every power station in the data with this appliance alone plugged in, at 85% efficiency. Type the running watts from your own label and the table works it out again.
Typical 33 W, from 25 W to 40 W. Watts vary by model and age. Check the label on your own appliance and enter it for an exact answer.
54 of 54 power stations run it at 33 W.
| Power station | Can it power it | Running time | Output | Start surge |
|---|---|---|---|---|
| BLUETTI Elite 10 Mini | Runs it | 3.3 h | 200 W | 300 W |
| Jackery Explorer 240 v2 | Runs it | 6.6 h | 300 W | 600 W |
| EcoFlow RIVER 3 Plus | Runs it | 7.4 h | 600 W | 1,200 W |
| BLUETTI Elite 30 V2 | Runs it | 7.4 h | 600 W | not published |
| Jackery Explorer 300 v2 | Runs it | 7.4 h | 300 W | 600 W |
| Goal Zero Yeti 300 | Runs it | 7.6 h | 350 W | 600 W |
| Goal Zero Yeti 500 | Runs it | 12.9 h | 500 W | 1,000 W |
| DJI Power 500 | Runs it | 13.2 h | 1,000 W | not published |
| Jackery Explorer 600 v2 | Runs it | 16.5 h | 500 W | 1,000 W |
| Goal Zero Yeti 700 | Runs it | 17.4 h | 600 W | 1,000 W |
| BLUETTI Elite 100 mini | Runs it | 25.9 h | 700 W | 1,050 W |
| BLUETTI Elite 100 V2 | Runs it | 26.4 h | 1,800 W | 3,600 W |
| EcoFlow DELTA 3 Classic | Runs it | 26.4 h | 1,800 W | 3,600 W |
| Anker SOLIX C1000 Gen 2 | Runs it | 26.4 h | 2,000 W | 3,000 W |
| EcoFlow DELTA 3 | Runs it | 26.4 h | 1,800 W | 3,600 W |
| EcoFlow DELTA 3 Plus | Runs it | 26.4 h | 1,800 W | 3,600 W |
| Pecron E1000LFP | Runs it | 26.4 h | 1,800 W | 3,000 W |
| DJI Power 1000 | Runs it | 26.4 h | 2,200 W | 4,400 W |
| Anker SOLIX C1000 | Runs it | 27.2 h | 1,800 W | 2,400 W |
| Jackery Explorer 1000 v2 | Runs it | 27.6 h | 1,500 W | 3,000 W |
| BLUETTI AC180 | Runs it | 29.7 h | 1,800 W | 2,700 W |
| ALLPOWERS R1500 | Runs it | 29.7 h | 1,800 W | 3,000 W |
| Jackery Explorer 1000 Plus | Runs it | 32.6 h | 2,000 W | 4,000 W |
| Goal Zero Yeti 1500 | Runs it | 38.8 h | 2,000 W | 3,600 W |
| Jackery Explorer 1500 v2 | Runs it | 39.6 h | 2,000 W | 4,000 W |
| Jackery Explorer 1500 Ultra | Runs it | 39.6 h | 1,800 W | 3,600 W |
| ALLPOWERS R2500 V2 | Runs it | 2.1 days | 2,500 W | 4,000 W |
| Jackery Explorer 2000 v2 | Runs it | 2.2 days | 2,200 W | 4,400 W |
| Jackery HomePower 2000 Plus v2 | Runs it | 2.2 days | 2,400 W | 4,800 W |
| EcoFlow DELTA 3 Max | Runs it | 2.2 days | 2,400 W | 4,800 W |
| Pecron E2400LFP | Runs it | 2.2 days | 2,400 W | 4,000 W |
| Anker SOLIX C2000 Gen 2 | Runs it | 2.2 days | 2,400 W | 4,000 W |
| EcoFlow DELTA 3 Max Plus | Runs it | 2.2 days | 3,000 W | 6,000 W |
| OUPES Mega 2 Pro | Runs it | 2.2 days | 2,500 W | not published |
| DJI Power 2000 | Runs it | 2.2 days | 3,000 W | not published |
| BLUETTI Elite 200 V2 | Runs it | 2.2 days | 2,600 W | not published |
| Anker SOLIX F2600 | Runs it | 2.7 days | 2,400 W | 2,800 W |
| BLUETTI Apex 300 | Runs it | 3.0 days | 3,840 W | not published |
| BLUETTI Elite 300 | Runs it | 3.2 days | 2,400 W | 4,800 W |
| EcoFlow DELTA 3 Ultra | Runs it | 3.3 days | 3,600 W | 7,200 W |
| Anker SOLIX F3000 | Runs it | 3.3 days | 3,600 W | 7,200 W |
| EcoFlow DELTA 3 Ultra Plus | Runs it | 3.3 days | 3,600 W | 7,200 W |
| Pecron E3600LFP | Runs it | 3.3 days | 3,600 W | 7,000 W |
| ALLPOWERS R3500 | Runs it | 3.4 days | 3,200 W | 6,000 W |
| ALLPOWERS R4000 | Runs it | 3.7 days | 3,600 W | 6,000 W |
| BLUETTI Elite 400 | Runs it | 4.1 days | 2,600 W | 5,200 W |
| Anker SOLIX F3800 | Runs it | 4.1 days | 6,000 W | 9,000 W |
| Anker SOLIX F3800 Plus | Runs it | 4.1 days | 6,000 W | 9,000 W |
| Goal Zero Yeti PRO 4000 | Runs it | 4.3 days | 3,600 W | 7,200 W |
| EcoFlow DELTA Pro 3 | Runs it | 4.4 days | 4,000 W | 8,000 W |
| OUPES Guardian 6000 V2 | Runs it | 4.9 days | 6,000 W | 9,000 W |
| Jackery Explorer 5000 Plus | Runs it | 5.4 days | 7,200 W | 14,400 W |
| EcoFlow DELTA Pro Ultra | Runs it | 6.6 days | 7,200 W | 10,800 W |
| EcoFlow DELTA Pro Ultra X | Runs it | 13.2 days | 12,000 W | not published |
What moves the number
Starlink gives the Mini, router included, an average draw of 25 W to 40 W. Melting snow can take more, and no figure for that or for peaks is published, so leave headroom in winter. The dish takes 12 to 48 V DC or USB-C power delivery, so the station's DC outputs can run it without the inverter.
Questions
How many watts does a Starlink Mini dish use?
Can a portable power station run a Starlink Mini dish?
How long will a power station run a Starlink Mini dish?
Does a Starlink Mini dish need extra watts to start?
Related setups
Sources
Researched from these pages, then checked against them a second time. The check corrected at least one figure.
- Starlink Mini specifications sheet maker specification sheet, checked
We read published figures and do the math; we do not measure appliances. The methodology states every formula on this page. Capacities are rated watt hours: 1,000 Wh rated gives 850 Wh usable at the default.