What size power station for a Starlink Standard dish with its router?

It needs a station with at least 88 W of continuous output. At the default 85% efficiency it takes about 828 Wh of rated capacity for 8 hours of running, and 2,485 Wh for 24 hours of running. 54 of the 54 power stations in the Enough Watts data set can power it. The smallest one that keeps it going for 24 hours of running is the Anker SOLIX F2600 (2,560 Wh).

Updated October 6, 2026

88W
Continuous output
None
Surge to start it
828Wh
Capacity for 8 hours of running
2,485Wh
Capacity for 24 hours of running
54 of 54
Stations that power it

Watts

Typical figures for this type, from the sources at the foot of this page. Watts vary by model and age. Check the label on your own appliance and enter it for an exact answer.

Running, typical: 88 W
Running, low to high: 75 W to 100 W
Starting: No start surge
Typical use a day: 24 hthe calculator starts from this, and you can change it
Average draw while on: 88 W
Voltage: 120 V

Explained in: Watts vs watt hours, explained and How to read an appliance label for watts.

The math

Worked with the typical figure, as the calculator does it.

Output88 W running, so the station's continuous output must be at least 88 W.
SurgeNo start surge: the running figure covers it.
Average draw88 W: the running watts count for every hour it is on.
A typical day88 W × 24 h = 2,112 Wh a day.
8 hours of running88 W × 8 h = 704 Wh usable, ÷ 0.85 = 828 Wh of rated capacity.
24 hours of running88 W × 24 h = 2,112 Wh usable, ÷ 0.85 = 2,485 Wh of rated capacity.
On the Anker SOLIX F26002,560 Wh × 0.85 = 2,176 Wh usable, ÷ 88 W = 24.7 h.

Stations that run it

Every power station in the data with this appliance alone plugged in, at 85% efficiency. Type the running watts from your own label and the table works it out again.

Running watts

Typical 88 W, from 75 W to 100 W. Watts vary by model and age. Check the label on your own appliance and enter it for an exact answer.

54 of 54 power stations run it at 88 W.

Power stations for a starlink Standard dish with router at 88 W
Power station	Can it power it	Running time	Output	Start surge
BLUETTI Elite 10 Mini	Runs it	1.2 h	200 W	300 W
Jackery Explorer 240 v2	Runs it	2.5 h	300 W	600 W
EcoFlow RIVER 3 Plus	Runs it	2.8 h	600 W	1,200 W
BLUETTI Elite 30 V2	Runs it	2.8 h	600 W	not published
Jackery Explorer 300 v2	Runs it	2.8 h	300 W	600 W
Goal Zero Yeti 300	Runs it	2.9 h	350 W	600 W
Goal Zero Yeti 500	Runs it	4.8 h	500 W	1,000 W
DJI Power 500	Runs it	4.9 h	1,000 W	not published
Jackery Explorer 600 v2	Runs it	6.2 h	500 W	1,000 W
Goal Zero Yeti 700	Runs it	6.5 h	600 W	1,000 W
BLUETTI Elite 100 mini	Runs it	9.7 h	700 W	1,050 W
BLUETTI Elite 100 V2	Runs it	9.9 h	1,800 W	3,600 W
EcoFlow DELTA 3 Classic	Runs it	9.9 h	1,800 W	3,600 W
Anker SOLIX C1000 Gen 2	Runs it	9.9 h	2,000 W	3,000 W
EcoFlow DELTA 3	Runs it	9.9 h	1,800 W	3,600 W
EcoFlow DELTA 3 Plus	Runs it	9.9 h	1,800 W	3,600 W
Pecron E1000LFP	Runs it	9.9 h	1,800 W	3,000 W
DJI Power 1000	Runs it	9.9 h	2,200 W	4,400 W
Anker SOLIX C1000	Runs it	10.2 h	1,800 W	2,400 W
Jackery Explorer 1000 v2	Runs it	10.3 h	1,500 W	3,000 W
BLUETTI AC180	Runs it	11.1 h	1,800 W	2,700 W
ALLPOWERS R1500	Runs it	11.1 h	1,800 W	3,000 W
Jackery Explorer 1000 Plus	Runs it	12.2 h	2,000 W	4,000 W
Goal Zero Yeti 1500	Runs it	14.5 h	2,000 W	3,600 W
Jackery Explorer 1500 v2	Runs it	14.8 h	2,000 W	4,000 W
Jackery Explorer 1500 Ultra	Runs it	14.8 h	1,800 W	3,600 W
ALLPOWERS R2500 V2	Runs it	18.5 h	2,500 W	4,000 W
Jackery Explorer 2000 v2	Runs it	19.7 h	2,200 W	4,400 W
Jackery HomePower 2000 Plus v2	Runs it	19.8 h	2,400 W	4,800 W
EcoFlow DELTA 3 Max	Runs it	19.8 h	2,400 W	4,800 W
Pecron E2400LFP	Runs it	19.8 h	2,400 W	4,000 W
Anker SOLIX C2000 Gen 2	Runs it	19.8 h	2,400 W	4,000 W
EcoFlow DELTA 3 Max Plus	Runs it	19.8 h	3,000 W	6,000 W
OUPES Mega 2 Pro	Runs it	19.8 h	2,500 W	not published
DJI Power 2000	Runs it	19.8 h	3,000 W	not published
BLUETTI Elite 200 V2	Runs it	20.0 h	2,600 W	not published
Anker SOLIX F2600	Runs it	24.7 h	2,400 W	2,800 W
BLUETTI Apex 300	Runs it	26.7 h	3,840 W	not published
BLUETTI Elite 300	Runs it	29.1 h	2,400 W	4,800 W
EcoFlow DELTA 3 Ultra	Runs it	29.7 h	3,600 W	7,200 W
Anker SOLIX F3000	Runs it	29.7 h	3,600 W	7,200 W
EcoFlow DELTA 3 Ultra Plus	Runs it	29.7 h	3,600 W	7,200 W
Pecron E3600LFP	Runs it	29.7 h	3,600 W	7,000 W
ALLPOWERS R3500	Runs it	30.6 h	3,200 W	6,000 W
ALLPOWERS R4000	Runs it	33.4 h	3,600 W	6,000 W
BLUETTI Elite 400	Runs it	37.1 h	2,600 W	5,200 W
Anker SOLIX F3800	Runs it	37.1 h	6,000 W	9,000 W
Anker SOLIX F3800 Plus	Runs it	37.1 h	6,000 W	9,000 W
Goal Zero Yeti PRO 4000	Runs it	38.6 h	3,600 W	7,200 W
EcoFlow DELTA Pro 3	Runs it	39.6 h	4,000 W	8,000 W
OUPES Guardian 6000 V2	Runs it	44.5 h	6,000 W	9,000 W
Jackery Explorer 5000 Plus	Runs it	2.0 days	7,200 W	14,400 W
EcoFlow DELTA Pro Ultra	Runs it	2.5 days	7,200 W	10,800 W
EcoFlow DELTA Pro Ultra X	Runs it	4.9 days	12,000 W	not published

Add it to the runtime calculator with the rest of your list

What moves the number

Starlink gives the Standard kit an average draw of 75 W to 100 W. Peaks and snow melting have no published figure, so plan for more than 100 W in winter. The kit plugs into AC through its own power supply; Starlink documents no DC input for it.

Questions

How many watts does a Starlink Standard dish with its router use?

About 88 W while running, from 75 W to 100 W across the models in our sources. Watts vary by model and age. Check the label on your own appliance and enter it for an exact answer.

Can a portable power station run a Starlink Standard dish with its router?

Yes. All 54 power stations in the Enough Watts data set can power it on its own. It takes at least 88 W of continuous output.

How long will a power station run a Starlink Standard dish with its router?

It depends on the battery. At 85% efficiency the smallest station that powers it, the BLUETTI Elite 10 Mini (128 Wh), gives about 1.2 h. The largest, the EcoFlow DELTA Pro Ultra X (12,288 Wh), gives about 4.9 days.

Does a Starlink Standard dish with its router need extra watts to start?

No. It has no motor or compressor, so it draws about its running watts from the moment it is switched on. The check that matters is a continuous output of at least 88 W.

Sources

Researched from these pages, then checked against them a second time. The check corrected at least one figure.

Starlink Standard (4X kit) specifications sheet maker specification sheet, checked October 6, 2026

We read published figures and do the math; we do not measure appliances. The methodology states every formula on this page. Capacities are rated watt hours: 1,000 Wh rated gives 850 Wh usable at the default.