Can the EcoFlow DELTA Pro 3 run Starlink?

The three checks

Starlink Standard dish on its own, with nothing else plugged in, against the published ratings of the EcoFlow DELTA Pro 3.

Starlink Standard dish on the EcoFlow DELTA Pro 3: power checks
Check	Needs	Station has	Result
Running watts against continuous output	88 W	4,000 W	Passes
Starting watts against surge rating	88 W, no start surge	8,000 W	Passes
A full day at 24 h a day	2,112 Wh	3,482 Wh usable	Passes

How long it runs across models

The appliance class spans a range of models. Running time on a full charge at the low, typical and high figure in the data:

Starlink Standard dish on the EcoFlow DELTA Pro 3, low to high
Case	Running watts	Running time
Low end of the class	75 W	46.4 h
Typical	88 W	39.6 h
High end of the class	100 W	34.8 h

Watts vary by model and age. Check the label on your own appliance and enter it for an exact answer.

Keeping up on solar

At 4 peak sun hours, counting 75% of the panel rating: 200 W of panels bring in about 600 Wh a day, 28% of the 2,112 Wh it uses at 24 h a day. 2,600 W of panels bring in about 7,800 Wh a day, more than the 2,112 Wh it uses at 24 h a day, so the station keeps up.

Other options

The smallest EcoFlow model in the data that is enough for a full day of a Starlink Standard dish is the EcoFlow DELTA 3 Ultra (3,072 Wh). The nearest capacities from any brand:

The smallest EcoFlow model that is enough, then the stations closest in capacity to the EcoFlow DELTA Pro 3, with a Starlink Standard dish
Power station	Capacity	Verdict	Running time
EcoFlow DELTA 3 Ultra	3,072 Wh	Enough	29.7 h
Anker SOLIX F3800	3,840 Wh	Enough	37.1 h
Anker SOLIX F3800 Plus	3,840 Wh	Enough	37.1 h
Goal Zero Yeti PRO 4000	3,994 Wh	Enough	38.6 h

The EcoFlow DELTA Pro 3

Everything the EcoFlow DELTA Pro 3 runs, its recharge times and full specifications

EcoFlow's page for the DELTA Pro 3 (opens in a new tab)

Enough Watts may earn a commission when you buy through links on this page. It never changes the math or the ranking.