How many watts does a 1/3 HP sump pump use?

Typical figures for this type, from the sources at the foot of this page. Watts vary by model and age. Check the label on your own appliance and enter it for an exact answer.

Running, typical
650 W
Running, low to high
500 W to 800 W
Starting
1,300 W1,000 W to 1,600 W, 2 times running
Typical use a day
2 hhours the motor actually runs
Average draw while on
650 W
Voltage
120 V
  • Assumes the motor runs the whole time; real use is often less.

The math

Worked with the typical figure, as the calculator does it.

  1. Output650 W running, so the station's continuous output must be at least 650 W.
  2. Surge1,300 W to start, so its surge rating must be at least 1,300 W.
  3. Average draw650 W: the running watts count for every hour it is on, as if the motor never paused.
  4. A typical day650 W × 2 h = 1,300 Wh a day.
  5. Typical 2 h a day650 W × 2 h = 1,300 Wh usable, ÷ 0.85 = 1,529 Wh of rated capacity.
  6. 8 hours of running650 W × 8 h = 5,200 Wh usable, ÷ 0.85 = 6,118 Wh of rated capacity.
  7. On the EcoFlow DELTA Pro Ultra6,144 Wh × 0.85 = 5,222 Wh usable, ÷ 650 W = 8.0 h.

Stations that run it

Every power station in the data with this appliance alone plugged in, at 85% efficiency. Type the running watts from your own label and the table works it out again.

watts

Typical 650 W, from 500 W to 800 W. Watts vary by model and age. Check the label on your own appliance and enter it for an exact answer.

43 of 54 power stations run it at 650 W and 1,300 W to start.

Power stations for a sump pump (1/3 HP) at 650 W
Power stationCan it power itRunning timeOutputStart surge
BLUETTI Elite 100 V2Runs it1.3 h1,800 W3,600 W
EcoFlow DELTA 3 ClassicRuns it1.3 h1,800 W3,600 W
Anker SOLIX C1000 Gen 2Runs it1.3 h2,000 W3,000 W
EcoFlow DELTA 3Runs it1.3 h1,800 W3,600 W
EcoFlow DELTA 3 PlusRuns it1.3 h1,800 W3,600 W
Pecron E1000LFPRuns it1.3 h1,800 W3,000 W
DJI Power 1000Runs it1.3 h2,200 W4,400 W
Anker SOLIX C1000Runs it1.4 h1,800 W2,400 W
Jackery Explorer 1000 v2Runs it1.4 h1,500 W3,000 W
BLUETTI AC180Runs it1.5 h1,800 W2,700 W
ALLPOWERS R1500Runs it1.5 h1,800 W3,000 W
Jackery Explorer 1000 PlusRuns it1.7 h2,000 W4,000 W
Goal Zero Yeti 1500Runs it2.0 h2,000 W3,600 W
Jackery Explorer 1500 v2Runs it2.0 h2,000 W4,000 W
Jackery Explorer 1500 UltraRuns it2.0 h1,800 W3,600 W
ALLPOWERS R2500 V2Runs it2.5 h2,500 W4,000 W
Jackery Explorer 2000 v2Runs it2.7 h2,200 W4,400 W
Jackery HomePower 2000 Plus v2Runs it2.7 h2,400 W4,800 W
EcoFlow DELTA 3 MaxRuns it2.7 h2,400 W4,800 W
Pecron E2400LFPRuns it2.7 h2,400 W4,000 W
Anker SOLIX C2000 Gen 2Runs it2.7 h2,400 W4,000 W
EcoFlow DELTA 3 Max PlusRuns it2.7 h3,000 W6,000 W
OUPES Mega 2 ProRuns it2.7 h2,500 Wnot published
DJI Power 2000Runs it2.7 h3,000 Wnot published
BLUETTI Elite 200 V2Runs it2.7 h2,600 Wnot published
Anker SOLIX F2600Runs it3.3 h2,400 W2,800 W
BLUETTI Apex 300Runs it3.6 h3,840 Wnot published
BLUETTI Elite 300Runs it3.9 h2,400 W4,800 W
EcoFlow DELTA 3 UltraRuns it4.0 h3,600 W7,200 W
Anker SOLIX F3000Runs it4.0 h3,600 W7,200 W
EcoFlow DELTA 3 Ultra PlusRuns it4.0 h3,600 W7,200 W
Pecron E3600LFPRuns it4.0 h3,600 W7,000 W
ALLPOWERS R3500Runs it4.1 h3,200 W6,000 W
ALLPOWERS R4000Runs it4.5 h3,600 W6,000 W
BLUETTI Elite 400Runs it5.0 h2,600 W5,200 W
Anker SOLIX F3800Runs it5.0 h6,000 W9,000 W
Anker SOLIX F3800 PlusRuns it5.0 h6,000 W9,000 W
Goal Zero Yeti PRO 4000Runs it5.2 h3,600 W7,200 W
EcoFlow DELTA Pro 3Runs it5.4 h4,000 W8,000 W
OUPES Guardian 6000 V2Runs it6.0 h6,000 W9,000 W
Jackery Explorer 5000 PlusRuns it6.6 h7,200 W14,400 W
EcoFlow DELTA Pro UltraRuns it8.0 h7,200 W10,800 W
EcoFlow DELTA Pro Ultra XRuns it16.1 h12,000 Wnot published
BLUETTI Elite 10 MiniCannot power itNeeds 650 W running at once; this station gives 200 W. Needs 1,300 W to start; this station peaks at 300 W.none200 W300 W
Jackery Explorer 240 v2Cannot power itNeeds 650 W running at once; this station gives 300 W. Needs 1,300 W to start; this station peaks at 600 W.none300 W600 W
EcoFlow RIVER 3 PlusCannot power itNeeds 650 W running at once; this station gives 600 W. Needs 1,300 W to start; this station peaks at 1,200 W.none600 W1,200 W
BLUETTI Elite 30 V2Cannot power itNeeds 650 W running at once; this station gives 600 W. Needs 1,300 W to start. Its surge rating is not published, and its 600 W continuous rating is lower.none600 Wnot published
Jackery Explorer 300 v2Cannot power itNeeds 650 W running at once; this station gives 300 W. Needs 1,300 W to start; this station peaks at 600 W.none300 W600 W
Goal Zero Yeti 300Cannot power itNeeds 650 W running at once; this station gives 350 W. Needs 1,300 W to start; this station peaks at 600 W.none350 W600 W
Goal Zero Yeti 500Cannot power itNeeds 650 W running at once; this station gives 500 W. Needs 1,300 W to start; this station peaks at 1,000 W.none500 W1,000 W
DJI Power 500Cannot power itNeeds 1,300 W to start. Its surge rating is not published, and its 1,000 W continuous rating is lower.none1,000 Wnot published
Jackery Explorer 600 v2Cannot power itNeeds 650 W running at once; this station gives 500 W. Needs 1,300 W to start; this station peaks at 1,000 W.none500 W1,000 W
Goal Zero Yeti 700Cannot power itNeeds 650 W running at once; this station gives 600 W. Needs 1,300 W to start; this station peaks at 1,000 W.none600 W1,000 W
BLUETTI Elite 100 miniCannot power itNeeds 1,300 W to start; this station peaks at 1,050 W.none700 W1,050 W

Add it to the runtime calculator with the rest of your list

What moves the number

Run time follows the water flowing into the pit, and no official source publishes it. We count 2 hours a day as a planning figure for a rainy day. Assumes the motor runs the whole time; real use is often less.

The start, about 1,300 W for a motor that runs at 650 W, is the check most likely to rule a station out. Sump pump backup works it out for every station.

Questions

How many watts does a sump pump (1/3 HP) use?
About 650 W while running, from 500 W to 800 W across the models in our sources. It needs about 1,300 W for a moment at start. Watts vary by model and age. Check the label on your own appliance and enter it for an exact answer.
Can a portable power station run a sump pump (1/3 HP)?
Yes. 43 of the 54 power stations in the Enough Watts data set can power it on its own. It takes at least 650 W of continuous output and a surge rating of 1,300 W.
How long will a power station run a sump pump (1/3 HP)?
It depends on the battery. At 85% efficiency the smallest station that powers it, the BLUETTI Elite 100 V2 (1,024 Wh), gives about 1.3 h. The largest, the EcoFlow DELTA Pro Ultra X (12,288 Wh), gives about 16.1 h.
Why does a sump pump (1/3 HP) need a high surge rating?
Its motor draws about 1,300 W for a moment at start, 2 times its 650 W running figure. A station whose surge rating is below that cannot start it, even when the continuous output is enough. 43 of the 54 stations pass that check.

Related setups

Sources

Researched from these pages, then checked against them a second time.

  1. Generator Wattage Chart: Common Appliances & Tools - Champion Power Equipment generator maker guide, checked

We read published figures and do the math; we do not measure appliances. The methodology states every formula on this page. Capacities are rated watt hours: 1,000 Wh rated gives 850 Wh usable at the default.