Watts

Typical figures for this type, from the sources at the foot of this page. Watts vary by model and age. Check the label on your own appliance and enter it for an exact answer.

Running, typical
600 W
Running, low to high
400 W to 960 W
Starting
1,200 W800 W to 1,920 W, 2 times running
Typical use a day
1 hhours the motor actually runs
Average draw while on
600 W
Voltage
120 V
  • Assumes the motor runs the whole time; real use is often less.

The math

Worked with the typical figure, as the calculator does it.

  1. Output600 W running, so the station's continuous output must be at least 600 W.
  2. Surge1,200 W to start, so its surge rating must be at least 1,200 W.
  3. Average draw600 W: the running watts count for every hour it is on, as if the motor never paused.
  4. A typical day600 W × 1 h = 600 Wh a day.
  5. Typical 1 h a day600 W × 1 h = 600 Wh usable, ÷ 0.85 = 706 Wh of rated capacity.
  6. 8 hours of running600 W × 8 h = 4,800 Wh usable, ÷ 0.85 = 5,647 Wh of rated capacity.
  7. On the EcoFlow DELTA Pro Ultra6,144 Wh × 0.85 = 5,222 Wh usable, ÷ 600 W = 8.7 h.

Stations that run it

Every power station in the data with this appliance alone plugged in, at 85% efficiency. Type the running watts from your own label and the table works it out again.

Add it to the runtime calculator with the rest of your list

What moves the number

A 1/2 inch drill runs at 400 W to about 600 W; an 8 amp drill reaches 960 W at its nameplate, and hammer drills draw more. The start, about 1,200 W, matters more than the hours: drilling comes in short bursts.

Questions

How many watts does an electric drill (corded) use?
About 600 W while running, from 400 W to 960 W across the models in our sources. It needs about 1,200 W for a moment at start. Watts vary by model and age. Check the label on your own appliance and enter it for an exact answer.
Can a portable power station run an electric drill (corded)?
Yes. 44 of the 54 power stations in the Enough Watts data set can power it on its own. It takes at least 600 W of continuous output and a surge rating of 1,200 W.
How long will a power station run an electric drill (corded)?
It depends on the battery. At 85% efficiency the smallest station that powers it, the EcoFlow RIVER 3 Plus (286 Wh), gives about 24 min. The largest, the EcoFlow DELTA Pro Ultra X (12,288 Wh), gives about 17.4 h.
Why does an electric drill (corded) need a high surge rating?
Its motor draws about 1,200 W for a moment at start, 2 times its 600 W running figure. A station whose surge rating is below that cannot start it, even when the continuous output is enough. 44 of the 54 stations pass that check.

Setups that include it

Sources

Researched from these pages, then checked against them a second time. The check corrected at least one figure.

  1. Generator Wattage Chart - Champion Power Equipment generator maker guide, checked
  2. Generator Wattage Worksheet (Generac) generator maker guide, checked
  3. 3/8-in (10mm) VSR Pistol Grip Drill With Keyless Chuck Kit (DWD110K) maker product page, checked
  4. 1/2-in (13mm) VSR Pistol Grip Drill (DWD210G) maker product page, checked

We read published figures and do the math; we do not measure appliances. The methodology states every formula on this page. Capacities are rated watt hours: 1,000 Wh rated gives 850 Wh usable at the default.